i made this cup holder from a piece of 3" pvc cap and a piece of aluminum stock. the mug handle slot was made by running it on the grinder. a short piece of 3" pipe drops in to hold tall fountain drinks/stop 'N rob coffee cups. the screw is a 4" long drywall screw and replaces one taken out from under the coin tray (remove little cover). this has worked better than the plastic two-cup that fits in the ashtray slot (from e-bay). i never have any coins for the coin tray anyway <img src="/forums/images/graemlins/rolleyes.gif" alt="" />

[Linked Image]

97Rodeo Rancho9ks/Aisins/3.2L SOHC/M1 only
------
Proper Prior Planning Prevents P*ss-Poor Performance--Maj. R.T.Spooner USMC(Ret.)