E locker install has commenced!

Print Thread

Rate Thread

Re: E locker install has commenced! #30237 03/30/02 04:21 PM

Joined: Oct 2001

Posts: 1,491

Colorado Springs

jx94148

Body Damage is Cool

I'm copying this wiring system that uses an on-off-on 2 circuit switch. Another disabling switch hidden out of reach would be a good idea.

Wiring instructions

The bolts are about 3.5 inches. I had 4 inch at first but they were just a bit too long.

<small>[ 30 March 2002, 10:24 AM: Message edited by: jx94148 ]</small>

'87 4Runner. '83 Honda XL250R. No mods on either.

Entire Thread
Subject	Posted By	Posted
E locker install has commenced!	jx94148	03/28/02 08:50 AM
Re: E locker install has commenced!	little_joe	03/28/02 02:00 PM
Re: E locker install has commenced!	Dandeman	03/28/02 03:14 PM
Re: E locker install has commenced!	BoostedInline6	03/28/02 04:59 PM
Re: E locker install has commenced!	carter	03/28/02 05:22 PM
Re: E locker install has commenced!	jx94148	03/29/02 06:18 AM
Re: E locker install has commenced!	jx94148	03/29/02 06:16 AM
Re: E locker install has commenced!	Kendall	03/29/02 03:50 PM
Re: E locker install has commenced!	BoostedInline6	03/29/02 05:02 PM
Re: E locker install has commenced!	jx94148	03/30/02 04:21 PM
Re: E locker install has commenced!	ErikB	03/31/02 12:31 AM
Re: E locker install has commenced!	Anonymous	03/31/02 03:01 AM
Re: E locker install has commenced!	bud r	03/31/02 03:03 AM
Re: E locker install has commenced!	jx94148	03/31/02 03:24 AM
Re: E locker install has commenced!	Anonymous	04/03/02 05:26 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: