W56 rebuild experience

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: W56 rebuild experience [Re: go_big_blue] #306670 08/25/03 06:31 PM

Joined: Nov 2000

Posts: 4,192

Rapid City/Albuquerque/Reno

DirtyHarry Offline

Toyota Moderator

I got a Transtar kit for my R151F and had a friend rebuild it with my help. The kit came with factory NSK bearings and seemed to be of good quality.

It sounds like you are a pretty competent mechanic and have the tools that you need to get the job done. I STRONGLY recommend the factory service manual for this job, it was a great help.

Harry Wagner
Harry Situations
4x4Wire's Toyota Section

Entire Thread
Subject	Posted By	Posted
W56 rebuild experience	go_big_blue	08/25/03 05:57 PM
Re: W56 rebuild experience	DirtyHarry	08/25/03 06:31 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.488s Queries: 16 (3.486s) Memory: 0.5947 MB (Peak: 0.6277 MB) Data Comp: Off Server Time: 2026-06-17 02:35:33 UTC
Valid HTML 5 and Valid CSS