2000 Rodeo - Check Engine Light FLASHING

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

2000 Rodeo - Check Engine Light FLASHING #308963 08/30/03 04:47 AM

Joined: Jan 2003

Posts: 22

near Denver, CO

GeroniMoe

Need a Spot

I just had some work done on the engine (3.2 V6) - on the way home from the shop (picked it up after-hours, of course, so there was no one to check with), anytime the engine is over about 1900-2000RPM, the check engine comes on, flashing - when the engine drops down back under 1.9-2kRPM, it goes off again - I don't notice any performance/sound changes; other than the light, there's nothing going on - any ideas?

- Scott

Re: 2000 Rodeo - Check Engine Light FLASHING [Re: GeroniMoe] #308964 08/30/03 05:36 PM

Anonymous

Unregistered

A "flashing" CEL means the PCM is detecting a condition that can cause serious performance issues and emissions system damage. Can't really troubleshoot it without the codes.
Joel

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.668s Queries: 15 (0.003s) Memory: 0.5852 MB (Peak: 0.6346 MB) Data Comp: Off Server Time: 2026-06-21 07:06:40 UTC
Valid HTML 5 and Valid CSS