3.0 PCV relocation

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.0 PCV relocation [Re: JackKnife] #312460 09/08/03 04:15 PM

Joined: Mar 2002

Posts: 774

Staunton, Virginia

Sid's Toy

Rock Warrior

hey redyota,
how hard is it to replace the valve cover gaskets. I have leaks from both covers on my 3.0. Thanks
Sid

92 4Runner SR5 3.0 standard tranny
4.88 gears, rear elocked, OME coils, SAW Tbars, allpro rock sliders and rear bumper, custom made front, downey v6 headers ...

Entire Thread
Subject	Posted By	Posted
3.0 PCV relocation	Myredyota	09/07/03 06:18 PM
Re: 3.0 PCV relocation	solarcrew	09/07/03 06:24 PM
Re: 3.0 PCV relocation	Myredyota	09/07/03 06:30 PM
Re: 3.0 PCV relocation	solarcrew	09/07/03 06:49 PM
Re: 3.0 PCV relocation	JackKnife	09/08/03 02:23 AM
Re: 3.0 PCV relocation	Sid's Toy	09/08/03 04:15 PM
Re: 3.0 PCV relocation	Toy4x	09/08/03 06:00 PM
Re: 3.0 PCV relocation	Myredyota	09/09/03 06:27 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 9.271s Queries: 16 (3.627s) Memory: 0.6068 MB (Peak: 0.6398 MB) Data Comp: Off Server Time: 2026-06-14 10:45:21 UTC
Valid HTML 5 and Valid CSS