Ok, I ran a compression test last night.....but I'm an idiot......I forgot to set it at WOT <img src="/forums/images/graemlins/rolleyes.gif" alt="" />. I was all done and grabing a bite to eat and thought "sh*t", I didn't do it right. So, does anyone know if the readings I got are accurate even though I didn't set it at WOT? If they are going to be off, I'll redo it tonight.

And, of course I forgot my readings at home this morning <img src="/forums/images/graemlins/frown.gif" alt="" />. But, off the top of my head, running a dry test all cylinders were between 170 and 185psi. Running a wet test (adding a little oil to the cylinder), all cylinders were between 185-195psi. So, the compression test didn't turn up anything too bad. I'm guessing a good bit of carbon buildup, but nothing really out of whack. However, the #3 spark plug had fresh, wet oil on it <img src="/forums/images/graemlins/shocked.gif" alt="" />. The rest (which I just changed the other day) were similar looking.

I will post up the exact readings this evening. Please comment on what you think may be going on and if you think I should redo the test because of I didn't have it at WOT. If the test was accurate, I'm thinking valves.