Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
door panel removal ? #315783 09/14/03 04:38 PM
Joined: Mar 2001
Posts: 61
Jeff B Offline OP
Getting the Wheeling Fever
Does any one have some how to tips for removing the door panels on a 2002 Double Cab?

Hboss has this page for the 4-Runner:
http://www.hboss.net/4runner/door-panel-removal.htm

The Tacoma has different arm rests and doesn't have the button on the back edge of the door...

Thanks- Jeff


2002 Double Cab Prerunner V6
Hellwig rear anti-sway bar
Re: door panel removal ? [Re: Jeff B] #315784 09/14/03 08:21 PM
Anonymous
Unregistered
Probably the same as any. Put a rag behind the window crank and pull out the clip that holds the crank on. remove the armrest,Remove the door latch . Pry the panel off with a screwdriver or something. Be gentle. Do the bottom first , then sides. When sides and bottom are all unclipped, the panel should be able to be lifted up and pulled off. If it has a corner button remove it too. It should be very easy.

Re: door panel removal ? #315785 09/16/03 03:40 AM
Joined: Mar 2001
Posts: 61
Jeff B Offline OP
Getting the Wheeling Fever
A couple of tips for door panel removal on a 2002 Double Cab with electric windows and locks.

Follow the steps in the link above. Don't remove the arm rest, it comes off with the panel. Slide the latch toward the front of the truck. It locks in by two hooks. Remove the panel without dettaching the latch mechanism by lifting the panel vertically until it comes off the window opening and the lock. Pass the latch through the panel. You will need to rotate one end of the panel up slightly to do this.

Once I figured out this it took ten minutes to remove the other panel. I'm not going to tell how long the first one took...


2002 Double Cab Prerunner V6
Hellwig rear anti-sway bar
Re: door panel removal ? [Re: Jeff B] #315786 09/30/03 02:02 AM
Anonymous
Unregistered
Wow! Nice link and some good advise. I just purchased some pre-cut window tint for the front doors. I was wondering how to get a clean look (behind the glass moulding) without too much trouble.

Thanks guys. This is why I keep checking out this site.

Good stuff.

Here's too all of you <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" />

You can see I like the beer.


Moderated by  4x4Wire, Dandeman, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5943 MB (Peak: 0.6539 MB) Data Comp: Off Server Time: 2026-06-10 14:54:25 UTC
Valid HTML 5 and Valid CSS