G*d D@mn exhaust manifold nuts/bolts!!!!

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: G*d D@mn exhaust manifold nuts/bolts!!!! [Re: mike_dup1] #315790 09/14/03 06:37 PM

Joined: Sep 2002

Posts: 326

Schenectady, NY

Canucklehead Offline

Mudrunner

Quote

Did you heat the nuts until they are red? that should break the rust thats holding them.

That's my plan for this afternoon.

Steve

'97 Rodeo 5spd. 3.2L SOHC V6 4WD

Entire Thread
Subject	Posted By	Posted
G*d D@mn exhaust manifold nuts/bolts!!!!	Canucklehead	09/14/03 04:54 PM
Re: G*d D@mn exhaust manifold nuts/bolts!!!!	mike_dup1	09/14/03 06:07 PM
Re: G*d D@mn exhaust manifold nuts/bolts!!!!	Canucklehead	09/14/03 06:37 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.867s Queries: 16 (3.865s) Memory: 0.5952 MB (Peak: 0.6282 MB) Data Comp: Off Server Time: 2026-06-02 21:32:40 UTC
Valid HTML 5 and Valid CSS