Ring gear chipped

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Ring gear chipped #31641 04/17/02 06:50 AM

Joined: Apr 2001

Posts: 1,062

Cin Ohio USA

Paul Elbisser Offline

Body Damage is Cool

How bad is it chipped? If it is only on the outside, or one tooth you can grind it off. You need to make sure there is no harsh edges that can start a crack into the gear.

It will keep it running for a while untill you get the E locker. I have ran one for a while that I ground off a chip that I acidently put in it on the workbench.

Paul Elbisser #3233
pastTLCAEastern Rep.
Pres Rice on the Rocks
www.riceontherocks.org

Entire Thread
Subject	Posted By	Posted
Ring gear chipped	toyrunner	04/17/02 06:32 AM
Re: Ring gear chipped	Paul Elbisser	04/17/02 06:50 AM
Re: Ring gear chipped	toyrunner	04/17/02 07:02 AM
Re: Ring gear chipped	Paul Elbisser	04/17/02 07:16 AM
Re: Ring gear chipped	Red_Chili	04/17/02 04:02 PM
Re: Ring gear chipped	anthony1	04/17/02 09:00 PM
Re: Ring gear chipped	toyrunner	04/18/02 02:47 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.667s Queries: 15 (3.664s) Memory: 0.6045 MB (Peak: 0.6374 MB) Data Comp: Off Server Time: 2026-06-04 00:03:52 UTC
Valid HTML 5 and Valid CSS