Low/high beams together

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Low/high beams together [Re: GeroniMoe] #317017 09/17/03 05:15 AM

Anonymous

Unregistered

Depending on how they are wired you might be able to do it just by taking the ground for the lights straight to metal. Usually it runs through the switch and it disconnected when you turn the high beams on. Not totally sure on the Rodeo but it's an easy thing to try.

Entire Thread
Subject	Posted By	Posted
Low/high beams together	GeroniMoe	09/17/03 04:32 AM
Re: Low/high beams together	Anonymous	09/17/03 05:15 AM
Re: Low/high beams together	boyd	09/18/03 06:36 AM
Re: Low/high beams together	RobG	09/18/03 02:02 PM
Re: Low/high beams together	maxwell417	09/19/03 02:40 AM
Re: Low/high beams together	randii	09/19/03 06:41 AM
Re: Low/high beams together	pu12en12g	09/19/03 05:42 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.494s Queries: 16 (3.491s) Memory: 0.6015 MB (Peak: 0.6345 MB) Data Comp: Off Server Time: 2026-06-14 11:36:06 UTC
Valid HTML 5 and Valid CSS