|
|
 Re: Replaced my dash illumination and installed dash bezel . . .
[Re: Smiley]
#317597
09/18/03 07:27 PM
|
|
Anonymous
Unregistered
|
I believe,(I am not sure if mine is like 96) the oil/pressure gets to 200+ and the middle is 85 thre is one dot a little over the middle btw 0 and 85.
Mine seets :
After cold start a little below 85
with hot engine a little over the dot(which I calculate to be 55)
and on the highway with 60-70MPH a little below 85.
That one is till 110lb/in
|
|
|
Re: Replaced my dash illumination and installed dash bezel . . .
#317598
09/18/03 11:18 PM
|
Joined: May 2002
Posts: 1,863
Body Damage is Cool
|
Ivan, you are right, they look different (they show numbers instead of dots).
Smiley, we have the exact same dash.
there are 4 gauge plates & 2 rectangles (one long, one short) wich are on the top(the short one) & bottom (the long one) with the stupid lights (the long one) & turn signals (the top one).
rubo
"If i can't crawl over it, i'll fly over it"
rubo
'96 Amigo 4x4, 3.2L V6, 4L30E, D44 rear, SOA, 1" BL, undergoing surgery.
'00 Rodeo LS 4x4, 3.2L V6, OME 919 Springs, front cranked to match,1" BL, 265/70x16 Scorion A/T's.
|
|
|
Re: Replaced my dash illumination and installed dash bezel . . .
[Re: rubo]
#317599
09/18/03 11:36 PM
|
Joined: Dec 2001
Posts: 5,911
Trail Leader
|
Metal fittings for the Ranchos... A set of lights for the light bar... DOR Sliderz... DOR Skidderz... DOR Leaf Springz... A custom steel rear bumper... Tera-Low T-case gear set... Aussie Locker for the rear diff... Aluminum dash & Interior kit... Dash gauge illumination kit... Man! - I sure hope my Secret Santa has some mighty DEEEEEEEEEP pockets! <img src="/forums/images/graemlins/notooth.gif" alt="" /> Smiley <img src="/forums/images/graemlins/cheers.gif" alt="" />
Six Isuzus, so far... still have three of them.
|
|
|
Re: Replaced my dash illumination and installed dash bezel . . .
[Re: rubo]
#317600
09/19/03 12:07 AM
|
|
Anonymous
Unregistered
|
I am not sure what are u taking about, but since I am nice guy <img src="/forums/images/graemlins/nana.gif" alt="" /> I did some small research and for less then 5mins me and my camera came to this: 1995.5 Isuzu Rodeo ![[Linked Image]](http://kirath.ultra.net/~CrazyINP12vIvan/Isuzu/1995%20copy.jpg) 1996 Isuzu Rodeo ![[Linked Image]](http://kirath.ultra.net/~CrazyINP12vIvan/Isuzu/1996%20copy.jpg) Now Compare those to the other one for Trooper and U can see why the oil/presure is different and will not show the "actual" <img src="/forums/images/graemlins/kewl.gif" alt="" /> Ivan Ivan, you are right, they look different (they show numbers instead of dots).
Smiley, we have the exact same dash.
there are 4 gauge plates & 2 rectangles (one long, one short) wich are on the top(the short one) & bottom (the long one) with the stupid lights (the long one) & turn signals (the top one).
rubo
|
|
|
Re: Replaced my dash illumination and installed dash bezel . . .
#317601
09/19/03 12:44 AM
|
Joined: Sep 2002
Posts: 326
Mudrunner
|
Thanks for the pics Ivan. Now Compare those to the other one for Trooper and U can see why the oil/presure is different and will not show the "actual" <img src="/forums/images/graemlins/kewl.gif" alt="" /> Ivan That shouldn't even be an issue as I'm sure most of us know where the needle should be even without the numbers (I know I never look at values, aside from mph, when I scan the instrument cluster. But I sure as hell notice when one of the needles isn't reading what it's supposed to). I think I'll be ordering one of these kits.
Steve
'97 Rodeo 5spd. 3.2L SOHC V6 4WD
|
|
|
Re: Replaced my dash illumination and installed dash bezel . . .
[Re: Canucklehead]
#317602
09/19/03 01:19 AM
|
Joined: May 2002
Posts: 1,863
Body Damage is Cool
|
Ivan, stp being such a <img src="/forums/images/graemlins/baby.gif" alt="" />.
Hwo cares what the numbers read.
I have my truck for 2 years now & i know every single noise it got (most of them were created by me).
I don't need to know the exact value of the oil pressure. All i need to see that the needle isn't on 0 & it's not on max.
rubo
"If i can't crawl over it, i'll fly over it"
rubo
'96 Amigo 4x4, 3.2L V6, 4L30E, D44 rear, SOA, 1" BL, undergoing surgery.
'00 Rodeo LS 4x4, 3.2L V6, OME 919 Springs, front cranked to match,1" BL, 265/70x16 Scorion A/T's.
|
|
|
Re: Replaced my dash illumination and installed dash bezel . . .
[Re: rubo]
#317603
09/19/03 01:43 AM
|
|
Anonymous
Unregistered
|
The very small is important <img src="/forums/images/graemlins/drunk.gif" alt="" /> I just did it because I wasn't sure what were u talking that thre is no #s Hey Everything is clear now <img src="/forums/images/graemlins/cheers.gif" alt="" />
|
|
|
Re: Replaced my dash illumination and installed dash bezel . . .
#317604
09/19/03 04:07 AM
|
Joined: Dec 2001
Posts: 5,911
Trail Leader
|
It was ME... I'm the one who said it didn't have a number in the middle (just the high and low), and it looks like I was wrong. I guess you can chalk it up to me only looking at the position of the needles, like mentioned above... but I did remember the part about the little dot... At least that's something, right? Cheers! <img src="/forums/images/graemlins/cheers.gif" alt="" /> Smiley
Six Isuzus, so far... still have three of them.
|
|
|
Re: Replaced my dash illumination and installed dash bezel . . .
[Re: Smiley]
#317605
09/19/03 04:12 AM
|
|
Anonymous
Unregistered
|
no problem smiley I just wanted to be clear for everyone and now everyone can see how is look like  <img src="/forums/images/graemlins/kewl.gif" alt="" />
|
|
|
Re: Replaced my dash illumination and installed dash bezel . . .
[Re: Smiley]
#317606
09/19/03 05:02 AM
|
Joined: Oct 2001
Posts: 4,016
Isuzu Moderator
|
Aussie Locker for the rear diff... Smiley <img src="/forums/images/graemlins/cheers.gif" alt="" /> Well I'm glad that post got through to someone. I figured it would stir up moderate interest, but it just went to crap LOL <img src="/forums/images/graemlins/oink.gif" alt="" />
Sean Strawmyer Back and ready to rock...... crawl. From Indiana or surrounding states and interested in wheelin'? Check out www.mwior.com
|
|
|
|
