I am working on getting my truck ready for GSMTR and thought I was going to replace the front brake pads. After getting the wheels off and the calipers off I saw that I needed new calipers. Great time for the vented rotor swap. All was going great until I went to put the pads on the 86 model rotors. With all of my research nobody ever mentioned the pad retainer pins need to be replaced with 86 model pins too. As soon as I saw that the old pins were too short I knew why but I hadnt heard anybody talk about it. Luckily a buddy that works at the local Toyota dealership had some and all is well. It truly was a bolt on project. I wont drive it for another couple of days and then I'll comment on the difference. One more thing you also have to use 86 model anti vibration springs on the pads.


85 4Runner, R151F, Marlins dual case, high steer,and frnt springs. Chevy rears, TJM bumper w/Ramsey winch, custom rear w/swing out tire carrier and rock rails. BudBuilt cross member w/ 2" drivetrain lift, 33" Boggers. 5:71 gears & F&R spool.