</font><blockquote><font size="1" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">quote:</font><hr /><font size="2" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">Originally posted by Supra 4x4: <strong>I was going to replace the front brake pads. After getting the wheels off and the calipers off I saw that I needed new calipers. Great time for the vented rotor swap. All was going great until I went to put the pads on the 86 model rotors. With all of my research nobody ever mentioned the pad retainer pins need to be replaced with 86 model pins too. As soon as I saw that the old pins were too short I knew why but I hadnt heard anybody talk about it. Luckily a buddy that works at the local Toyota dealership had some and all is well. It truly was a bolt on project. I wont drive it for another couple of days and then I'll comment on the difference. One more thing you also have to use 86 model anti vibration springs on the pads.</strong></font><hr /></blockquote><font size="2" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">I ran into the same problem, and no one had the correct pins. Parts stores would look it up and every time they would be old style short ones. Finally took some long shoulder 1/4" bolts and drilled them for cotter pins. Works great!
- seen in FOUR WHEELER mag July 2006 & OFF-ROAD mag Feb 2007 - '84 4Runner ARBed 5.29s F&R,4.7 & 2.28 t-cases,hy-steer,BudBuilt skid,30spl Longs,36" TSLs,Chevys
'83 P/U, Buick 231 V6,Holley 4 bbl,Weiand intake,Downey headers,TH350 w/700R4 gearset
|