Where to route the power and RCA cables for my amps ?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Where to route the power and RCA cables for my amps ? [Re: pu12en12g] #318347 09/19/03 09:35 PM

Anonymous

Unregistered

routed RCAs on oneside under carpet all the way back and mounted amp to back of rear seat, Rockford FOsgate amp so cover hid all wiring to amp itself. I ran power cable along other side of Rodeo as to not have any interference, ran same way, along carpet under kick panel all the way back...looks and sounds great

Entire Thread
Subject	Posted By	Posted
Where to route the power and RCA cables for my amps ?	pu12en12g	09/19/03 09:05 PM
Re: Where to route the power and RCA cables for my amps ?	Anonymous	09/19/03 09:35 PM
Re: Where to route the power and RCA cables for my amps ?	JasonB	09/19/03 09:59 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.574s Queries: 16 (3.572s) Memory: 0.5940 MB (Peak: 0.6270 MB) Data Comp: Off Server Time: 2026-06-15 22:22:51 UTC
Valid HTML 5 and Valid CSS