|
|
|
|
Re: vented rotor swap
#31840
04/23/02 11:24 AM
|
Joined: Nov 1999
Posts: 839
Toyota Moderator
|
Black 4runner next to this one is the one that I sold a few months back to "mudshack" on this board. The "yellow" truck was supposed to be "desert tan", but I think the paint shop mixed the color wrong. It finally drove me nuts and I spent a weekend painting the truck. Engine bay is still 'yeller.
You are probably eying up my relay box. It holds my relays for the fans, and for the ARB compressor, etc. I did this because I kept killing relays from getting mud in them. Wanted something "almost" watertight.
Just worry about getting that thing of yours on the road! I wanna see it at the GSMTR ;-)
CAZ
|
|
Re: vented rotor swap
#31841
04/23/02 04:11 PM
|
Joined: Apr 2001
Posts: 1,062
Body Damage is Cool
|
YEa I am going to make it. I had it runnning yesterday. I was just looking for all the info I could get. It's alot easier if someone just tells me. I can get a little slow after staring at the thing for 3 weeks. Like the fuel pump, all I needed to do was hook the green wire from the 7M MAF to the truck Circuit open relay. And it works fine.
I'm at the tinker stages now. I need to get some money together for fans and exaust so I can drive it.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.008s Queries: 14 (0.005s) Memory: 0.5943 MB (Peak: 0.6585 MB) Data Comp: Off Server Time: 2026-11-16 11:02:47 UTCValid HTML 5 and Valid CSS