http://www.sky-manufacturing.com/suspension2.htm , scroll down till you find it.

It uses the IFS hub with a solid axle locking hub. Pretty complete actually. But you could just use the thin spacers, or try your wheels with less backspacing. Shouldn't take long to mock up, then you would know.

I would use the Sky kit if I had the SAS to do over. They seem better at doing this kit than at web design. But I used adapters from Performance Wheel with no issues.

-Bill
'87 4Runner w/ '96 5VZ-FE, 'Red Chili II'
'97 Taco XtraCab 3RZ-FE, 'BlackBean'
TLCA # 13257, Rising Sun 4x4 Club Land Use Coordinator
"He who stops being better stops being good." -Oliver Cromwell