How do I get the pitman arm off

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: How do I get the pitman arm off [Re: johnny_boy02] #321306 09/25/03 09:18 PM

Joined: Aug 2001

Posts: 2,941

Las Cruces, NM

DRTDEVL

Roll Me Over

Start with the PB Blaster now. Hit it daily until you do the job. Then rent a pitman arm puller. Tighten it as much as you can without bending it, and whack the crap out of the arm and bolt head. You may need to get a torch involved to persuade it to come off. Have fun...

"A young man who does not have what it takes to perform military service is not likely to have what it takes to make a living." - John F. Kennedy

Proud owner of an 88 Montero (with a blown engine).

Entire Thread
Subject	Posted By	Posted
How do I get the pitman arm off	johnny_boy02	09/25/03 09:11 PM
Re: How do I get the pitman arm off	DRTDEVL	09/25/03 09:18 PM
Re: How do I get the pitman arm off	Anonymous	09/25/03 09:18 PM
Re: How do I get the pitman arm off	DirtyHarry	09/25/03 09:24 PM
Re: How do I get the pitman arm off	Pappy	09/26/03 12:17 AM
Re: How do I get the pitman arm off	Anonymous	09/26/03 12:31 AM
Re: How do I get the pitman arm off	Anonymous	09/26/03 03:17 AM
Re: How do I get the pitman arm off	Anonymous	09/26/03 04:24 AM
Re: How do I get the pitman arm off	Adam F	09/26/03 04:45 AM
Re: How do I get the pitman arm off	johnny_boy02	09/26/03 06:27 AM
Re: How do I get the pitman arm off	Anonymous	09/26/03 08:01 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: