when the truck is running you should measure 14 volts or higher at the battery posts.

if not, the alternator aint doing its job...

check the belt. it is "tight" enough?

measure the voltage at the post of the alternator. then at the battery. voltage drop should be very small.

but again, alternator should be putting out 14 or more volts...


leo d.

90 4runner, v6, auto, WCOR CitB kit,
marlin duals, arb rear, tt front
4.88, blah, blah, blah...

Pres. of TEAM IFS! and
GETTING OFF 4WD Club member