Re-torque 2.6?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re-torque 2.6? #333537 10/18/03 07:57 PM

Joined: Nov 2002

Posts: 92

Tacoma, WA USA

hfoobe

Getting the Wheeling Fever

My engine has about 12000 miles on it now. Rebuilt block, AMC head. I just read a post that said to re-torque the head bolts and set the valves every 12 to 15000 miles. Is this correct? If it is, do I tighten the head bolts at running temp or cold? I believe the valves get set cold.

Entire Thread
Subject	Posted By	Posted
Re-torque 2.6?	hfoobe	10/18/03 07:57 PM
Re: Re-torque 2.6?	mlclark	10/18/03 08:17 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.585s Queries: 15 (3.582s) Memory: 0.5941 MB (Peak: 0.6271 MB) Data Comp: Off Server Time: 2026-06-20 05:17:20 UTC
Valid HTML 5 and Valid CSS