94 22RE EFI intake manifold

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 94 22RE EFI intake manifold [Re: toyrunner] #335297 10/22/03 04:15 PM

Joined: Nov 2000

Posts: 4,192

Rapid City/Albuquerque/Reno

DirtyHarry Offline

Toyota Moderator

This is the best writeup I have found:

http://home.comcast.net/~jonmarkstewart/85xcab.htm#plenum

I used the whole plenum- upper, lower, and the later throttle body. I *think* that you can use the older lower plenum but you have to use the newer upper and throttle body in order to ditch the external Air Flow Valve.

Harry Wagner
Harry Situations
4x4Wire's Toyota Section

Entire Thread
Subject	Posted By	Posted
94 22RE EFI intake manifold	toyrunner	10/22/03 05:55 AM
Re: 94 22RE EFI intake manifold	toyrunner	10/22/03 03:41 PM
Re: 94 22RE EFI intake manifold	Buster	10/22/03 04:40 PM
Re: 94 22RE EFI intake manifold	DirtyHarry	10/22/03 04:15 PM
Re: 94 22RE EFI intake manifold	carter	10/22/03 04:59 PM
Re: 94 22RE EFI intake manifold	toyrunner	10/23/03 03:44 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.464s Queries: 16 (3.462s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-05-28 02:27:06 UTC
Valid HTML 5 and Valid CSS