Parking brake cable

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Parking brake cable [Re: mtnfreak] #337054 10/27/03 06:31 PM

Anonymous

Unregistered

Thanks for the replies guys! The housing that the e-brake handle is in only has a small opening, just big enough for the pin. When i rotate the handle, the end of the cable is then hidden in the housing. I don't know how i'm gonna be able to replace the pin and then be able to get the cable back in. I don't want to have to take the whole thing apart! Thanks again for any help!

Entire Thread
Subject	Posted By	Posted
Parking brake cable	Anonymous	10/25/03 06:34 PM
Re: Parking brake cable	Anonymous	10/26/03 02:54 AM
Re: Parking brake cable	mtnfreak	10/27/03 05:25 PM
Re: Parking brake cable	Anonymous	10/27/03 06:31 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.801s Queries: 16 (3.799s) Memory: 0.5955 MB (Peak: 0.6285 MB) Data Comp: Off Server Time: 2026-06-14 16:15:21 UTC
Valid HTML 5 and Valid CSS