Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Newbie intro--Another Georgia boy #338239 10/28/03 02:25 AM
Joined: Oct 2003
Posts: 113
Little_Dog Offline OP
Wheeler
Hi. I just found this forum. I use my Mitsu for hauling trash and getting back on the property here in Georgia. Aragon is about 50 miles west of Atlanta, just south of Rome. I've had the truck since 91. It has a rebuilt 2.6 with about 5k miles and a rebuilt 5 speed with similar miles. It has an 8 foot steel flatbed that I think will be shortened to 6 foot soon to improve departure angles. I'm using this less for farm duty now. I'd like to make it more off road-able and head out on some trails now that I actually have weekends off of work.
Plan 1: do something about those open diffs with 3.91 gears!
What should I look for? and where should I look for It? BTW Evans junkyard in Silver Creek has a Monty 2.6 Auto in decent shape for $800 but no GA title. minimal body damage if anyone is interested.


70 FJ40 under construction
Re: Newbie intro--Another Georgia boy [Re: Little_Dog] #338240 10/28/03 02:33 AM
Joined: Jan 2000
Posts: 16,227
off-roader Offline
Web Wheeler
*****
Welcome to the forums. There are quite a few Mitsu 2.6 owners in your neck of the woods. Off the top of my head FastEddy (Ed) and PMONTERO (Powell) are in the Altanta area.

I'm sure they'll have lots of ideas to help you make it more wheelable.

Ray


Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page
Re: Newbie intro--Another Georgia boy [Re: Little_Dog] #338241 10/28/03 03:02 AM
Joined: Apr 2002
Posts: 3,622
NathanC Offline
Roll Me Over
Welcome! Ditch the 3.909's and get 4.625's from a Monty <img src="/forums/images/graemlins/kewl.gif" alt="" />. mwhite has done it, and I also have. I was lucky enough to get a rear diff with an LSD.

There's plenty of frame to chop of the rear of the pre-'87 trucks <img src="/forums/images/graemlins/evil.gif" alt="" />.


'06 Dakota QC 4.7 6sp 4x4
'88 Mighty Max
'77 KZ1000 fun old bike
Re: Newbie intro--Another Georgia boy [Re: NathanC] #338242 10/28/03 04:35 AM
Joined: Jul 2001
Posts: 3,169
pmontero Offline
Roll Me Over
Welcome to the board Little Dog! I'm a V6 Monty guy so I don't have a lot of info on your truck. Fasteddy is our SE 2.6 guru. I do know that there is a Monty in Ringgold, GA for sale right now with all of the goodies for $1500. You could buy that and move all of the goodies over to your pickup and sell the Monty. Or keep the Monty and wheel it as is.

Either way, we'll have to meet up on one of the N. GA. trips we do now and then.

Welcome,

Powell


'87 Montero Diesel
'98 Porsche Boxster Electric
and more...
Greasology
NotPetroleum
Re: Newbie intro--Another Georgia boy [Re: Little_Dog] #338243 10/28/03 04:58 AM
Joined: Feb 2001
Posts: 2,356
MarkG Offline
Body Damage is Cool
*****
Welcome Little Dog!

Yep. Ditch those gears and get some 4.625's. There are a couple of folks here driving Mitsu Trucks. They may jump in with more suggestions.


Mitsu # 6 - 98 6G72 Montero Sport, Locking Rear Diff, Aisin Manual Hubs, 31x10.5

Mitsu # 7 - 02 6G74 Montero Limited
Re: Newbie intro--Another Georgia boy [Re: MarkG] #338244 10/28/03 11:34 PM
Joined: Oct 2003
Posts: 113
Little_Dog Offline OP
Wheeler
Which montys have the gears I need? Do all 4 cyl Montys have the same axles? Is there a tag or something on the axle to indicate its an LSD? The local Monty 4cl Gen1 auto is available in Rome for $800.


70 FJ40 under construction
Re: Newbie intro--Another Georgia boy [Re: Little_Dog] #338245 10/28/03 11:48 PM
Joined: Apr 2002
Posts: 3,622
NathanC Offline
Roll Me Over
All 2.6 Monty diff gears will work for you. Most of them are 4.625's, but there are a few odd ones floating around out there that have 4.88's. There is also the possibility of 4.22's, I've seen them once in an '87 PowerRam50. You can check the ratio by checking a placard that's in the engine compartment.

My opinion is the 4.625's with 33's feel about the same as 3.909's did with 235's. 33's seem like they would be a very tight fit on a pre-'87 truck. Heck they are tight on my '88 with a 3" body lift. Maybe 32's would work better?

You can ID an LSD a couple different ways. One is by looking for an orange sticker in the doorjam...
OR
Look for a Monty that has headlight washers and a bouncy seat(suspension seat similar to semi's). The headlight washers, bouncy seat, and LSD were an off-road package from my understanding.


'06 Dakota QC 4.7 6sp 4x4
'88 Mighty Max
'77 KZ1000 fun old bike
Re: Newbie intro--Another Georgia boy [Re: NathanC] #338246 10/29/03 02:11 AM
Joined: Oct 2003
Posts: 113
Little_Dog Offline OP
Wheeler
Thanks. That's what I needed to know.


70 FJ40 under construction







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.012s Queries: 15 (0.009s) Memory: 0.6240 MB (Peak: 0.7236 MB) Data Comp: Off Server Time: 2026-11-18 05:19:44 UTC
Valid HTML 5 and Valid CSS