All 2.6 Monty diff gears will work for you. Most of them are 4.625's, but there are a few odd ones floating around out there that have 4.88's. There is also the possibility of 4.22's, I've seen them once in an '87 PowerRam50. You can check the ratio by checking a placard that's in the engine compartment.

My opinion is the 4.625's with 33's feel about the same as 3.909's did with 235's. 33's seem like they would be a very tight fit on a pre-'87 truck. Heck they are tight on my '88 with a 3" body lift. Maybe 32's would work better?

You can ID an LSD a couple different ways. One is by looking for an orange sticker in the doorjam...
OR
Look for a Monty that has headlight washers and a bouncy seat(suspension seat similar to semi's). The headlight washers, bouncy seat, and LSD were an off-road package from my understanding.


'06 Dakota QC 4.7 6sp 4x4
'88 Mighty Max
'77 KZ1000 fun old bike