need p/n for longer studs for All-Pro 3/4" spacers

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

need p/n for longer studs for All-Pro 3/4" spacers #338825 10/29/03 01:55 AM

Joined: Feb 2000

Posts: 221

Dayton, OH

AlaskaToy

Wheeler

Went to get a free balance since I swapped rims recently. the monkeys with the impact wrench cross-threaded and snapped a stud. Since it's non-stock, they didn't know what to order as a replacement. I do know it's a 1/2" stud.

I searched for dorman and stud and spacer, but couln'd find the dorman p/n for the studs AP uses with the 3/4" spacer. I need the number for the stud and the lug nut. Thanks.

AJ
93 Toyota, dana 60, 14-bolt

Entire Thread
Subject	Posted By	Posted
need p/n for longer studs for All-Pro 3/4" spacers	AlaskaToy	10/29/03 01:55 AM
Re: need p/n for longer studs for All-Pro 3/4" spacers	anthony1	10/29/03 02:14 AM
Re: need p/n for longer studs for All-Pro 3/4" spacers	AlaskaToy	10/29/03 02:18 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.496s Queries: 15 (3.493s) Memory: 0.5967 MB (Peak: 0.6297 MB) Data Comp: Off Server Time: 2026-06-25 02:11:31 UTC
Valid HTML 5 and Valid CSS