aisin hubs question...

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: aisin hubs question... [Re: Rabichulo] #339407 10/30/03 04:33 AM

Joined: Jan 2000

Posts: 758

Kirkland, WA USA

DanWheeler Offline

Rock Warrior

dont know if this will help you or not but this is my write-up on replacing wheel studs which includes removing my AISIN manual hubs.

Replacing Wheel Studs

1986 Montero 2.6l
31X10.5 BFG MT - Weber carb with custom intake
Rear LSD - RCI seats - Oil cooler - Manual hubs
Custom bumpers front and rear + rock sliders

Entire Thread
Subject	Posted By	Posted
aisin hubs question...	Rabichulo	10/29/03 09:07 PM
Re: aisin hubs question...	MarkG	10/29/03 11:47 PM
Re: aisin hubs question...	Mitch	10/29/03 11:57 PM
Re: aisin hubs question...	DanWheeler	10/30/03 04:33 AM
Re: aisin hubs question...	Anonymous	10/31/03 10:34 PM
Re: aisin hubs question...	Rabichulo	11/05/03 08:28 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.921s Queries: 16 (3.919s) Memory: 0.6017 MB (Peak: 0.6346 MB) Data Comp: Off Server Time: 2026-06-24 09:16:18 UTC
Valid HTML 5 and Valid CSS