Toyota engines are simple to swap out, just make sure you take the engine harness loose at the computer (behind the pass side kick panel, bolts to remove are 10mm) instead of at the engine. Just unplug, and pull through the firewall take out with the engine. Makes it alot easier than taking off all the plug ins on the engine. There are only a couple vacuum hoses, wiring from the coil side (plug, and alternator connections. All bolts on the toyota are pretty much 17, 14, 12, 10, big bolts at transmission are 17, small are 14, get some wobble extensions to reach the top 2 17mm bolts, put a bunch together, and loosen from where you have room, you can buy the cheap ones from walmart, about $10. Ratchet wrenches help too taking off the starter, also the fuel line on the fuel filter(located under the intake ) is 17mm. Have fun.

Last edited by J-me4runner; 11/09/03 02:02 PM.