I have PP springs that were on the truck from the previous owner, and 26mm torsion bars cranked to 15" from rim to trim. No body lift. The truck is a little front end high, but I'm seldom heavy loaded and prefer the steeper approach angle. If i can find a set of FJ80 springs, i'll swap them out and sell the PPs...

As for tires:
I tried a set of 33x12.5x15 from a friend for a week. They rub in the front when compressed, the rears didn't.

I don't like body lifts, so i didn't do one. I just went ahead and got 32x11.5x15 and they are a great compromise. They fit fine, and still I have a nice low center of gravity... <img src="/forums/images/graemlins/butwiggle.gif" alt="" />