Need Haronic Balincer for a Gen 1

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Need Haronic Balincer for a Gen 1 [Re: DirtCheap] #347722 11/15/03 08:09 AM

Joined: Jan 2002

Posts: 457

Weiser, Idaho

IdahoJack

Mudrunner

That's a high failure item and you might have a hard time getting a good used one. Last year, I had to replace mine, found one on this web site http://www.car-part.com/

90 Montero, 2dr, AT, V6, LSD, AC, KYB shocks, bouncy seat, 182K miles, JDM engine, 87 Starion seats, tow hitch
http://www.geocities.com/idahojack03/Index

Entire Thread
Subject	Posted By	Posted
Need Haronic Balincer for a Gen 1	DirtCheap	11/15/03 01:32 AM
Re: Need Haronic Balincer for a Gen 1	Grandpa Bill	11/15/03 02:32 AM
Re: Need Haronic Balincer for a Gen 1	DirtCheap	11/15/03 06:01 AM
Re: Need Haronic Balincer for a Gen 1	IdahoJack	11/15/03 08:09 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.837s Queries: 16 (3.834s) Memory: 0.5996 MB (Peak: 0.6326 MB) Data Comp: Off Server Time: 2026-11-07 17:21:54 UTC
Valid HTML 5 and Valid CSS