|
|
|
|
 2002 Rodeo factory amplifier wiring diag./pinouts
#349718
11/19/03 01:33 AM
|
Joined: Sep 2002
Posts: 53
OP
Getting the Wheeling Fever
|
I have recently acquired a factory subwoofer amplifier from a 2002 Rodeo (Isuzu part#2-90597-005-0) and am looking for the pinouts of the connector. I have already tried carstereohelp.com and didn't find anything for this amp.
Any help is appreciated.
Thanks,
Dave
'99 Rodeo LS 4WD,
3 Indy 4x susp.lift w/OME 912s & SkyJackers, Aisin hubs, KC fog lights, KC driving lights, 255/75-15 Pirelli Scorpion AT's
|
|
 Re: 2002 Rodeo factory amplifier wiring diag./pinouts
[Re: 99RodeoDude]
#349719
11/20/03 05:00 PM
|
|
Anonymous
Unregistered
|
Your best bet would be the dealer. I can tell you from 13 years experience. Aftermarket installers know very little about dealer add ons. I would call the parts department. They are pretty cool when I need help.
Good luck
It helps if you tip the guy. Lunch money is always a good incentive.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 1.974s Queries: 15 (0.004s) Memory: 0.5854 MB (Peak: 0.6346 MB) Data Comp: Off Server Time: 2026-06-10 05:07:05 UTCValid HTML 5 and Valid CSS 
