Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
voltage problem #351006 11/21/03 03:07 PM
Joined: Oct 2002
Posts: 220
doc long Offline OP
Wheeler
about six months ago this started.
when i start the jeep the voltage is about 12. if i rev the engine, the voltage jumps up and stays at 14. i tightened the belt and it isn't squeeling. i replaced the alternator with another basic 63 amp, and it still does it.
any ideas
thanks
Brian

Re: voltage problem [Re: doc long] #351007 11/21/03 04:36 PM
Joined: Oct 2001
Posts: 1,986
M
Mike Bondi Offline
Body Damage is Cool
Brian...What you are describing is fairly normal. A 12 volt battery charges at around 13.5 volts, and once the surface charge wears off, it settles down to a little over 12 volts. My 90 Wrangler charges at 14 volts, and when I start the critter in the morning, the battery is sitting close to 12. A defective battery will often show a high voltage in the 15 to 16 volt range, but from what you are saying, things don't sound too far from normal. Your voltage regulator may be sticking a little, if you need to rev the engine for charging to take place...Be cool...Mike <img src="/forums/images/graemlins/oink.gif" alt="" />


2013 Wrangler Rubicon, 2014 Jeep Cherokee Latitude, 09 Mercedes Benz ML350 4matic...Old scooter trash trying to do good, in the flat lands of Indiana
Re: voltage problem [Re: doc long] #351008 11/21/03 06:27 PM
Anonymous
Unregistered
If you are running a 1 wire altrnator , havinf to rev it is normal to get the charging voltage up. are you running an internal or external regulator? if it is external check your grounds.

Re: voltage problem #351009 11/21/03 07:25 PM
Joined: Oct 2002
Posts: 220
doc long Offline OP
Wheeler
it's an internal voltage regulator. standard wiring setup.
maybe i just need to check the contacts. the wierd part is that it was doing it before and after the new alternator and the new alt has a new regulator in it.
any other ideas might help. i'm gonna go through all the contacts this weekend and see if it helps.
thanks guys.
Brian <img src="/forums/images/graemlins/smile.gif" alt="" />

Re: voltage problem [Re: doc long] #351010 11/22/03 02:59 AM
Anonymous
Unregistered
do you have a resistor in your field exhitaion lead? what year jeep is this in?

Re: voltage problem #351011 11/22/03 03:38 PM
Joined: Oct 2002
Posts: 220
doc long Offline OP
Wheeler
83 cj7,258, not sure about the resistor
<img src="/forums/images/graemlins/smile.gif" alt="" />


Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.018s Queries: 15 (0.014s) Memory: 0.6062 MB (Peak: 0.6718 MB) Data Comp: Off Server Time: 2026-11-18 05:16:13 UTC
Valid HTML 5 and Valid CSS