I am not real sure if stock gaskets will work with the Eldbrocks.

If you look closely at the flange that bolts to the heads, you will see that the openings for the primary tube is much smaller then the size of the exhaust ports. It does not really provide a smooth flow. Since the stock gaskets are going to be sized for the size of the opening, they may not work well with the Edlebrock headers. While your engine is appart you can do some comparing and decide which is the better way to go. I can tell you that I had Edlebrocks on for 50,000 miles and never had a gasket issue using thier gaskets.

Gadget