Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
HEI #353050 11/25/03 04:32 AM
Anonymous
Unregistered
Looking at an HEI conversion. Which one is good? What have you guys used? Have read many articles and most of them came out of a junk yard not very many left if any that I have seen. Is there a bolt in one you can get or one that does not need a bunch of work to get it right? Any info is great info.

Thanks, Scott <img src="/forums/images/graemlins/cheers.gif" alt="" />

Re: HEI #353051 11/25/03 05:50 AM
Joined: Jan 2003
Posts: 54
mwhite Offline
Getting the Wheeling Fever
This should tell you what you need to know.
http://www.4x4wire.com/jeep/tech/electrical/hei02/


88 Mighty Max 2.6 (170,000miles)
3 body lift, 1 1/2 torsion lift, lower bumpstops, 4.625
gears, 31 1/2 buckshot radials,warn 8274
Re: HEI [Re: mwhite] #353052 11/25/03 06:22 AM
Anonymous
Unregistered
Thanks Mike have read that before. But is there a HEI out there that is aftermarket that will work? Like I said there are not a lot of those around here in the wrecking yards. I am not a chevy guy so not sure what to look for in a HEI. The only chevy I owned was pionts and that got changed to a MSD.

Scott <img src="/forums/images/graemlins/cheers.gif" alt="" />

Re: HEI #353053 11/25/03 07:00 AM
Anonymous
Unregistered
There is an aftermarket distributor from Davis Unified Ignition. Be prepared to spend about $360. I would definitely just go to the pick-n-pull and get a core. (And if you're lucky a drive gear as well) Then go get some new parts for it. That will be the easiest road to take. In my area, getting the core was the hardest part, but cost and performance-wise it was well worth the effort.

Re: HEI #353054 11/25/03 07:09 PM
Joined: Jul 2003
Posts: 359
jeepfun4u2 Offline
Mudrunner
i am using a davis on my rig. no problems, a great unit! but i'm comparing it to the prestalite (eeek) that i had before. what i like about it is that you can use gm parts when something breaks, and i'm in a sort out-of-the-way place in mexico. gm parts are easy to get here. anyway, thumbs up on the dui ignition! good luck, rob


American in Mexico with my 76 CJ7,4.6 Liter I6
Weber 32/36,Header,FlowMaster,DUI Ignition
3"Lift,33's,TH400 Tranny/Dana 20
Re: HEI [Re: jeepfun4u2] #353055 11/25/03 08:40 PM
Anonymous
Unregistered
I just upgraded my 83 CJ7 with a 258 this past weekend, with the HEI dist.. Works GREAT!! I got my rebuilt unit with a warranty from Cape Connections @ www.driveajeep.com $209.00. Just dropped it in an go. I have Howell TBI, and i just disconnected the TFI and a MSD 6 box off my jeep.

Re: HEI #353056 11/26/03 03:50 AM
Anonymous
Unregistered
Thanks for the info guys will look at the options. Just got my header so am working on that at the moment. HEI will have to wait till next weekend.

Scott <img src="/forums/images/graemlins/cheers.gif" alt="" />

Re: HEI #353057 11/26/03 04:15 AM
Anonymous
Unregistered
I just installed this kit on my cj. I have not tried it yet, but the install was easy and the kit only cost $109. http://driveajeep.com/

Re: HEI #353058 11/26/03 06:53 PM
Anonymous
Unregistered
DrDon,
You must have gone with the TFI upgrade vs the HEI Distributor. ??

Re: HEI #353059 12/03/03 07:47 PM
Joined: Oct 2002
Posts: 220
doc long Offline
Wheeler
hey Roger,
i have the tfi right now with the howell.
do you like the hei better? is it worth it?
i'm pretty happy with the tfi. what made you switch?

Brian <img src="/forums/images/graemlins/smile.gif" alt="" />

Page 1 of 2 1 2

Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.011s Queries: 16 (0.007s) Memory: 0.6206 MB (Peak: 0.7243 MB) Data Comp: Off Server Time: 2026-11-16 01:36:06 UTC
Valid HTML 5 and Valid CSS