Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Wheels #353908 11/26/03 09:27 PM
Joined: Aug 2003
Posts: 57
JOEDIRT Offline OP
Getting the Wheeling Fever
I just had a set of 15x8 black rock crawlers mounted in 31-10.50 conti sportiva at's. It only took me ten minutes to get to the mud hole. They stick out 3" and I am loving it. No real loss of power. It rides much better, great in mud, and looks awesome. With the wider stance it handles so much better. I am going out of town and will try to post pics next week. The voids of these tires are closer to a mud terrain than an at. It does howl a little on road but now it matches my cut off exhaust and high flow intake. <img src="/forums/images/graemlins/cheers.gif" alt="" /> Has anyone else used these tires? Does anyone want a set of 5 225/75/16 goodyear wranglers on 16x7? Will negotiate.


97 TJ SE, intake, baja wheels, 31" mudders
Stripped down to a rollin gas can.
Re: Wheels [Re: JOEDIRT] #353909 11/26/03 10:00 PM
Anonymous
Unregistered
Sounds good. Got any pics?

Re: Wheels [Re: JOEDIRT] #353910 11/27/03 09:18 AM
Joined: Jun 2001
Posts: 846
pucci Offline
Rock Warrior
31/10.5" tire on the 8" wide rims looks tuff - I had the same size on same rims on my first Troop. Stuck out just right and the wider track definately improved handling! <img src="/forums/images/graemlins/kewl.gif" alt="" />



2.6 Trooper
2.0 Impulse Turbo
Re: Wheels [Re: JOEDIRT] #353911 11/27/03 12:02 PM
Joined: Jun 2002
Posts: 583
txsoulfly Offline
Rock Warrior
Hey what was your back spacing for those rock crawlers?


Mando
1998 Rodeo S 4x4 3.2, OME 913's, 2" coil spacers, Rancho 9000's
Re: Wheels [Re: txsoulfly] #353912 11/30/03 03:33 PM
Joined: Aug 2003
Posts: 57
JOEDIRT Offline OP
Getting the Wheeling Fever
It was 3.75. I posted a while ago about running 32's with no lift and it can be done with a little trimming. <img src="/forums/images/graemlins/bird.gif" alt="" /> I measured and I can run 33x10.5 with no lift as well. Not the 12.5's. I chopped my fenders. I took out the wheel well liner. Then I cut off the flange at the back of the well and ground it down to the weld that hold it all together. Then I cut 2" off my front bumper, valence,and the fender all the way around to the door. All I have left to do is chop the bumper bracket and flatten whats left of that flange in the back. And undercoat the whole well when I am done. I'll post pics today. I went wheeling and never came close to rubbin one. <img src="/forums/images/graemlins/cheers.gif" alt="" />


97 TJ SE, intake, baja wheels, 31" mudders
Stripped down to a rollin gas can.
Re: Wheels [Re: JOEDIRT] #353913 11/30/03 11:00 PM
Joined: Aug 2003
Posts: 57
JOEDIRT Offline OP
Getting the Wheeling Fever
Hey I have pics of my ride. One during wheeling, one parked and some of my herced interior and storage box in back. Now who wants to post them I can't. Thanks <img src="/forums/images/graemlins/cheers.gif" alt="" />


97 TJ SE, intake, baja wheels, 31" mudders
Stripped down to a rollin gas can.
Re: Wheels [Re: JOEDIRT] #353914 12/01/03 01:40 AM
Joined: Oct 2002
Posts: 2,285
CPOM Offline
Body Damage is Cool


CHRIS
98 Amigo, 92 Pup

need a pickup 1st gen fuel level sender
Re: Wheels [Re: CPOM] #353915 12/05/03 12:16 PM
Joined: Aug 2003
Posts: 57
JOEDIRT Offline OP
Getting the Wheeling Fever
Here are some pics.
http://berisford.net/uploads/woody.jpg
http://berisford.net/uploads/front.jpg
Time for PT then <img src="/forums/images/graemlins/cheers.gif" alt="" />


97 TJ SE, intake, baja wheels, 31" mudders
Stripped down to a rollin gas can.







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.029s Queries: 15 (0.026s) Memory: 0.6202 MB (Peak: 0.6992 MB) Data Comp: Off Server Time: 2026-11-19 05:32:56 UTC
Valid HTML 5 and Valid CSS