|
|
|
|
Re: Wheels
[Re: txsoulfly]
#353912
11/30/03 03:33 PM
|
Joined: Aug 2003
Posts: 57
OP
Getting the Wheeling Fever
|
It was 3.75. I posted a while ago about running 32's with no lift and it can be done with a little trimming. <img src="/forums/images/graemlins/bird.gif" alt="" /> I measured and I can run 33x10.5 with no lift as well. Not the 12.5's. I chopped my fenders. I took out the wheel well liner. Then I cut off the flange at the back of the well and ground it down to the weld that hold it all together. Then I cut 2" off my front bumper, valence,and the fender all the way around to the door. All I have left to do is chop the bumper bracket and flatten whats left of that flange in the back. And undercoat the whole well when I am done. I'll post pics today. I went wheeling and never came close to rubbin one. <img src="/forums/images/graemlins/cheers.gif" alt="" />
97 TJ SE, intake, baja wheels, 31" mudders Stripped down to a rollin gas can.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.894s Queries: 16 (3.891s) Memory: 0.6076 MB (Peak: 0.6406 MB) Data Comp: Off Server Time: 2026-11-19 05:51:56 UTCValid HTML 5 and Valid CSS