you may have a BENT axle. so as it rotates around the housing and the seal, it is working it's way to flattening the seal...

the FSM has a measuring steps and specs on allowable tolerances.

as for replacing the seals, on my 90, it takes about 4 tools and about an hour... bleeding the brakes the one that MIGHT take another person...


leo d.

90 4runner, v6, auto, WCOR CitB kit,
marlin duals, arb rear, tt front
4.88, blah, blah, blah...

Pres. of TEAM IFS! and
GETTING OFF 4WD Club member