Quote
Quote
I am looking into getting the tranny from which the same vehicle my donor motor came from with 30,000 on it, it is a 99. will my x-fer case bolt up to the tranny? its a r150F i think.
Thanks



The 91 Tcase will not fit on the back of the of a 99 tranny. The bolt pattern is different. You can use Marlin's 3.4-4GT adapter. This will allow a top shifting, right hand output, 4Cyl tcase to bolt onto the back of the 99 tranny.

Currently the Marlin Crawler web page only shows the two adapters listed under 2 part number. There are actually 6 different kits. There are 4 different manual transmission conversion plate kits, they are as follows 2.4, 2.7, 3.0 & 3.4. Each kit is different, but all are priced the same ($349)

The web site bunches them together as one item and then the proper kit was sent after talking with the customer and getting the exact engine/tranny info.

I am sorry for the confusion this has caused and I will be changing the web site today to reflect all 6 different kits.

http://www.marlincrawler.com/specialadapters.html


Why would you need an adapter (24-4GT) to bolt a gear driven case to a 2.4L 5spd? <img src="/forums/images/graemlins/confused.gif" alt="" />

Also, my understanding was that the R150 to gear driven reduction box adapter in the V6 Tacoma "kit" was the same as the old "V6 adapter" (3.0L) and that just the adapter to go from the reduction box to the Taco case was the new part... <img src="/forums/images/graemlins/confused.gif" alt="" />

'97 4Runner, '06 F350, '86 4Runner, '05 WR450
http://home.4x4wire.com/erik