Newbie Torsion Bar Question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Newbie Torsion Bar Question [Re: walkingman] #357413 12/04/03 12:13 AM

Joined: Oct 2003

Posts: 715

Orange County, CA

socalmonty Offline

Rock Warrior

iirc, I took 'em off and threw them in a vice, then used a hacksaw. It was pretty easy.

Sean - Orange County, CA
MAIL: seanwilliams78@gmail.com
1995 Montero SR - For exploring and getting away!
1994 Volvo 850 Turbo - 402hp and counting!
1966 VW Bug 2275cc - For stoplight drags!

Entire Thread
Subject	Posted By	Posted
Newbie Torsion Bar Question	walkingman	12/03/03 07:20 PM
Re: Newbie Torsion Bar Question	Anonymous	12/03/03 08:49 PM
Re: Newbie Torsion Bar Question	walkingman	12/03/03 10:19 PM
Re: Newbie Torsion Bar Question	socalmonty	12/04/03 12:13 AM
Re: Newbie Torsion Bar Question	Little_Dog	12/04/03 12:40 AM
Re: Newbie Torsion Bar Question	LRJ4x4	12/04/03 01:41 AM
Re: Newbie Torsion Bar Question	FranklinP	12/04/03 03:03 AM
Re: Newbie Torsion Bar Question	NHMonty	12/04/03 03:09 AM
Re: Newbie Torsion Bar Question	87Montero	12/04/03 04:12 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.484s Queries: 16 (3.481s) Memory: 0.6098 MB (Peak: 0.6428 MB) Data Comp: Off Server Time: 2026-06-23 08:48:44 UTC
Valid HTML 5 and Valid CSS