Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
exhaust question #358475 12/05/03 03:42 PM
Joined: Oct 2002
Posts: 220
doc long Offline OP
Wheeler
up until last week i had a leak where the exhaust pipe connects to the cat. it had slipped out of the clamp and was hanging on by a thread. i tightened it up last weekend and it seems to have a little less power now. i'm running the howell tbi on a 258 rebuilt 30k ago.
my first question is, will i notice an increase in power with a borla cat-back, header or both.

next is, what is a high flow cat? is it worth looking into?

and finally, at what point do you have to worry about having too little back-pressure?

Thanks
Brian <img src="/forums/images/graemlins/smile.gif" alt="" />

Re: exhaust question [Re: doc long] #358476 12/06/03 01:18 AM
Anonymous
Unregistered
A header will give you more horsepower and if you get a really good one you will still have lots of low end tourqe. a high flow cat is exactly what it sounds like a cat. with higher flow. if you run straght header or stright mainfold you will have too little backpressure


Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.016s Queries: 15 (0.013s) Memory: 0.5844 MB (Peak: 0.6339 MB) Data Comp: Off Server Time: 2026-11-18 03:47:08 UTC
Valid HTML 5 and Valid CSS