Steering/knuckle parts Source - Stock '85

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Steering/knuckle parts Source - Stock '85 #360266 12/09/03 04:36 AM

Joined: Nov 2002

Posts: 23

Santa Rosa, Ca

NVR FNSH

Need a Spot

The front end on my '85 is getting pretty loose and the knuckles leak like sieves so it's time for a complete rebuild. Any suggestions on the best source - read cheapest - for tie rod ends, knuckle rebuild kits, wheel bearings etc?

Brian

Re: Steering/knuckle parts Source - Stock '85 [Re: NVR FNSH] #360267 12/09/03 04:52 AM

Joined: Apr 2000

Posts: 4,230

Roseville, CA, Gateway to the ...

OOP'S

Roll Me Over

http://www.allprooffroad.com/
http://www.marlincrawler.com/

David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA

"Serenity through Sobriety"

Re: Steering/knuckle parts Source - Stock '85 [Re: OOP'S] #360268 12/09/03 04:55 AM

Anonymous

Unregistered

this is another post that can be fought to death and already has been. A search might reap you lots of knowledge but thats not the point of this thread is it. I personally dealt with All Pro and had nothing but a good experience with them. All I needed was provided plus more. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Re: Steering/knuckle parts Source - Stock '85 #360269 12/09/03 05:19 AM

Anonymous

Unregistered

Joshua said it. Go with allpro you won't be disappointed!!
<img src="/forums/images/graemlins/notooth.gif" alt="" />

Re: Steering/knuckle parts Source - Stock '85 [Re: NVR FNSH] #360270 12/09/03 07:39 PM

Joined: Jun 2000

Posts: 1,002

The OC

carter

Body Damage is Cool

Here is another source... http://jtoutfitters.com/category/mechanical.axles_and_bearings.mini_truck/

Mike Carter
85 & 86 4Runners

My Website

Re: Steering/knuckle parts Source - Stock '85 [Re: carter] #360271 12/09/03 09:11 PM

Joined: Feb 2001

Posts: 402

Folsom, CA

whitetoy

Mudrunner

I would get the axle seals at a toyota dealer.
Non-OEM do not seal as well, or so I have heard.

Rick
1984 4Runner

Re: Steering/knuckle parts Source - Stock '85 [Re: whitetoy] #360272 12/09/03 11:12 PM

Joined: Aug 2001

Posts: 5,986

Littleton, CO

Red_Chili

Toyota Section Staffer

OEM is not Toyota. Its Aisin/Koyo/NipponDenso depending on the part. So you can get OEM while NOT visiting the Toyota dealer, if you shop wisely.

I used the AllPro kit in my SA conversion, but I would get the same, OEM kit, Koyo bearings from Jim Sanville in Canon City CO, 719-276-6974, [email]jim75fj40@iwon.com.[/email] Right around $70 last time I checked. Jim is a member of Rising Sun 4x4 club, and a good guy.

-Bill
'87 4Runner w/ '96 5VZ-FE, 'Red Chili II'
'97 Taco XtraCab 3RZ-FE, 'BlackBean'
TLCA # 13257, Rising Sun 4x4 Club Land Use Coordinator
"He who stops being better stops being good." -Oliver Cromwell

Re: Steering/knuckle parts Source - Stock '85 [Re: Red_Chili] #360273 12/10/03 12:39 AM

Anonymous

Unregistered

Complete seals/wipers/bearings. I have bought from kurt before. I ordered monday afternoon and got it on Wed. http://www.cruiseroutfitters.com/seals.html

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: