|
|
|
|
Re: DIY headers?
[Re: tkrispin]
#360954
12/10/03 06:52 PM
|
Joined: Mar 2001
Posts: 2,731
Roll Me Over
|
It would be very cool if you tried this. I've often thought of it myself.
I wouldn't sweat the whold power band thing, I mean the aftermarket headers change that as it is. It's a just a matter if you like the change. I personally wouldn't mind some more top end out of my 3.0. I think worst case you'd have to shorten or lenthen tubes.
Idea: Maybe you can mock up some headers with clamps so that you can swap out straight sections. Try a few configurations so see what you like best. Then weld it up? Then let is know the final dimensions. <img src="/forums/images/graemlins/smile.gif" alt="" />
Frank.
1994 4runner, 3.0, auto, 4.88's, 31's, BJ spacers, Coil spacers, air shocks, D-ring anchors, 4Crawler F/R swaybar discos. www.sdori.com
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 5.550s Queries: 16 (5.547s) Memory: 0.6100 MB (Peak: 0.6430 MB) Data Comp: Off Server Time: 2026-11-18 12:37:27 UTCValid HTML 5 and Valid CSS