Highlift Jack Use

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Highlift Jack Use [Re: 4Crawler] #364125 12/17/03 12:13 AM

Anonymous

Unregistered

I did the same but mine are on the very ends, I simply did not close off the ends of the square tube, hi lift slips right in there...

Entire Thread
Subject	Posted By	Posted
Highlift Jack Use	markshoreline	12/16/03 07:11 AM
Re: Highlift Jack Use	Anonymous	12/16/03 07:17 AM
Re: Highlift Jack Use	markshoreline	12/16/03 10:54 PM
Re: Highlift Jack Use	anthony1	12/16/03 10:55 PM
Re: Highlift Jack Use	Anonymous	12/17/03 12:00 AM
Re: Highlift Jack Use	4Crawler	12/17/03 12:10 AM
Re: Highlift Jack Use	Anonymous	12/17/03 12:13 AM
Re: Highlift Jack Use	Red_Chili	12/17/03 12:29 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.505s Queries: 16 (3.503s) Memory: 0.6038 MB (Peak: 0.6368 MB) Data Comp: Off Server Time: 2026-06-23 07:36:05 UTC
Valid HTML 5 and Valid CSS