2.8 headers

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

2.8 headers #366057 12/19/03 08:31 PM

Anonymous

Unregistered

I know most everyone says a set of Edelbrock TES headers will not fit on a 2.8 inside a trooper. My question is which ones(s). There are like four different versions of the 2.8 headers. there is a 2wd and 4wd version. For both s-10 and blazer trucks??? And why will they not fit? are they rubbing? where the frame rail?

Entire Thread
Subject	Posted By	Posted
2.8 headers	Anonymous	12/19/03 08:31 PM
Re: 2.8 headers	paulevans76	12/19/03 09:55 PM
Re: 2.8 headers	MattGold	12/19/03 10:09 PM
Re: 2.8 headers	paulevans76	12/19/03 10:11 PM
Re: 2.8 headers	Anonymous	12/20/03 01:10 AM
Re: 2.8 headers	MattGold	12/20/03 04:18 AM
Re: 2.8 headers	Greg55_99	12/21/03 01:53 PM
Re: 2.8 headers	Anonymous	12/22/03 05:31 PM
Re: 2.8 headers	Greg55_99	12/23/03 11:49 AM
Re: 2.8 headers	paulevans76	12/23/03 06:35 PM
Re: 2.8 headers	Anonymous	12/24/03 07:35 PM
Re: 2.8 headers	randii	12/24/03 08:52 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.673s Queries: 15 (3.671s) Memory: 0.6143 MB (Peak: 0.6473 MB) Data Comp: Off Server Time: 2026-07-13 22:09:23 UTC
Valid HTML 5 and Valid CSS