2.8 headers

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2.8 headers [Re: paulevans76] #366061 12/20/03 01:10 AM

Anonymous

Unregistered

who's talking about an intake? I was wondering what exactly was stopping headers from going on a 2.8 in a trooper? Someone said starter. is that all? are the edlebrock tes headers long tube or short tubes?
I was thinking of modifying a set to get fit if they were just rubbing the frame.

Entire Thread
Subject	Posted By	Posted
2.8 headers	Anonymous	12/19/03 08:31 PM
Re: 2.8 headers	paulevans76	12/19/03 09:55 PM
Re: 2.8 headers	MattGold	12/19/03 10:09 PM
Re: 2.8 headers	paulevans76	12/19/03 10:11 PM
Re: 2.8 headers	Anonymous	12/20/03 01:10 AM
Re: 2.8 headers	MattGold	12/20/03 04:18 AM
Re: 2.8 headers	Greg55_99	12/21/03 01:53 PM
Re: 2.8 headers	Anonymous	12/22/03 05:31 PM
Re: 2.8 headers	Greg55_99	12/23/03 11:49 AM
Re: 2.8 headers	paulevans76	12/23/03 06:35 PM
Re: 2.8 headers	Anonymous	12/24/03 07:35 PM
Re: 2.8 headers	randii	12/24/03 08:52 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.517s Queries: 16 (3.514s) Memory: 0.6139 MB (Peak: 0.6469 MB) Data Comp: Off Server Time: 2026-07-13 21:28:03 UTC
Valid HTML 5 and Valid CSS