2.8 headers

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2.8 headers #366065 12/23/03 11:49 AM

Joined: Jun 2003

Posts: 53

Boston

Greg55_99

Getting the Wheeling Fever

There are also a couple of other sources for these type of headers:

http://www.bmcautos.com/

http://www.killerbv6.com/homepage.html

The set from KillerbV6 is pretty pricey though at $895!

[Linked Image]

Hope this helps out.

Greg

Entire Thread
Subject	Posted By	Posted
2.8 headers	Anonymous	12/19/03 08:31 PM
Re: 2.8 headers	paulevans76	12/19/03 09:55 PM
Re: 2.8 headers	MattGold	12/19/03 10:09 PM
Re: 2.8 headers	paulevans76	12/19/03 10:11 PM
Re: 2.8 headers	Anonymous	12/20/03 01:10 AM
Re: 2.8 headers	MattGold	12/20/03 04:18 AM
Re: 2.8 headers	Greg55_99	12/21/03 01:53 PM
Re: 2.8 headers	Anonymous	12/22/03 05:31 PM
Re: 2.8 headers	Greg55_99	12/23/03 11:49 AM
Re: 2.8 headers	paulevans76	12/23/03 06:35 PM
Re: 2.8 headers	Anonymous	12/24/03 07:35 PM
Re: 2.8 headers	randii	12/24/03 08:52 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.476s Queries: 15 (3.473s) Memory: 0.6166 MB (Peak: 0.6496 MB) Data Comp: Off Server Time: 2026-07-16 02:52:09 UTC
Valid HTML 5 and Valid CSS