Reseting the ECU on 3.0L

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Reseting the ECU on 3.0L [Re: corvettelvr73] #368052 12/24/03 03:07 PM

Anonymous

Unregistered

I think its the 80amp fuse. Although, I couldn't get mine out, I was able to get it up about a cm, but it did the trick. You can also just disconnect the ground from the battery. It takes only a few seconds to reset. Any tips for getting that fuse all the way out?

Entire Thread
Subject	Posted By	Posted
Reseting the ECU on 3.0L	corvettelvr73	12/24/03 05:44 AM
Re: Reseting the ECU on 3.0L	code33	12/24/03 08:19 AM
Re: Reseting the ECU on 3.0L	Anonymous	12/24/03 03:07 PM
Re: Reseting the ECU on 3.0L	FattyCBR	12/24/03 04:37 PM
Re: Reseting the ECU on 3.0L	Anonymous	12/24/03 04:50 PM
Re: Reseting the ECU on 3.0L	Anonymous	12/30/03 08:30 PM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.561s Queries: 16 (3.559s) Memory: 0.6000 MB (Peak: 0.6330 MB) Data Comp: Off Server Time: 2026-06-21 16:54:09 UTC
Valid HTML 5 and Valid CSS