I use antiseize wherever the fastener is subject to corrosion, and red label threadlocker (Loctite) on anything I don't want to lose off the truck.

A breaker bar or other extension won't keep a rusted bolt from breaking, but may give you a finer "touch" to keep from rounding it off or breaking the bolt. My best technique is to put the fastener under a strong torque short of rounding/breaking, and then whack it a good lick toshock it free, after a generous dose of PB Blaster, of course. A box end wrench makes whacking the head easier, and the slickest trick is to use an air hammer to do the shaking up....


Not responsible for advice not taken...