Antiseize is great stuff. I use it on all the equipment that I maintain on many saltwater aquarium systems at the zoo that I work at (we're talking huge systems with 1000 lb sea lions). I have multiple giant pumps (30+ hp) that are held together with stainless steel fasteners. The ONLY way to keep these things servicable is to use antiseize. And this is with SS. You can forget about getting galvanized fasteners apart in a salt environment without the blessed goop!

Many poeple think that antiseize will encourage fasteners to come loose over time. NO. It will not lead to a nut or bolt backing off. In fact, it helps with accuracy in torquing.

If you don't have any antiseize available, straight grease is almost as good. I've been using grease on my lugs for years. I regularly apply some grease to each lug every time I have a wheel off. Much better than breaking a lug!


1994 3.0L 4x4 pickup.
4.62 gears (4.22 stock), 33x10.5 BFG MTs. LSD rear. Five speed trans. 172K
Previously owned Mitsubishis:
1986 2.6L 4x4 Mighty Max, 1985 2.6L 4x4 D50
1987 2.6L Raider, 1989 3.0L Raider
1995 Montero SR