|
|
|
|
 Will it bolt up?
#372788
01/03/04 01:26 PM
|
Joined: Sep 2003
Posts: 265
OP
Mudrunner
|
Ok, I need to rebuild the frontend on my truck. But its my DD so I cant have it torn apart for long. I ran in to a guy today that will sell me a complete frontend for $75. I was thinking it would be good if I could buy it and run it in my truck while im rebuilding my frontend. That way I can take as long as I need to rebuild mine.
But the frontend he has came out of a 84. I have a 86 with a SAS. I didnt do the SAS (I bought it that way) so I dont know where all the parts on my truck now came from. I have a hy-steer some im good there. The only thing im not sure about are the brakes.
Will the roters on the 84 front work with my 86 calipers? Anything else I should know about? Im going to buy the frontend no matter what. Just for the spare parts. But I need to know if it will all bolt on my truck with no problems.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.494s Queries: 15 (3.492s) Memory: 0.5940 MB (Peak: 0.6270 MB) Data Comp: Off Server Time: 2026-07-16 09:16:31 UTCValid HTML 5 and Valid CSS 
