Bent Tie Rod

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Bent Tie Rod [Re: axledeep] #373838 01/05/04 08:40 PM

Joined: Nov 2000

Posts: 4,192

Rapid City/Albuquerque/Reno

DirtyHarry Offline

Toyota Moderator

You need a new tie rod, you cannot realign the vehicle with the bent tie rod. Once it is bent the strength has been greatly compromised, even if it is straightened. All-Pro or Rockstomper can set you up with a heavy duty tie rod, or you can likely find a stocker from someone who has converted to Hysteer.

Harry Wagner
Harry Situations
4x4Wire's Toyota Section

Entire Thread
Subject	Posted By	Posted
Bent Tie Rod	axledeep	01/05/04 08:34 PM
Re: Bent Tie Rod	DirtyHarry	01/05/04 08:40 PM
Re: Bent Tie Rod	axledeep	01/05/04 08:44 PM
Re: Bent Tie Rod	Red_Chili	01/05/04 08:57 PM
Re: Bent Tie Rod	whitetoy	01/05/04 09:00 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.523s Queries: 16 (3.521s) Memory: 0.6012 MB (Peak: 0.6342 MB) Data Comp: Off Server Time: 2026-06-21 15:33:59 UTC
Valid HTML 5 and Valid CSS