2.0L and 2.6L flywheel interchange?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

2.0L and 2.6L flywheel interchange? #374528 01/06/04 02:05 AM

Joined: Dec 2003

Posts: 72

Seattle, WA

carnuck

Getting the Wheeling Fever

I found an '83 Mitsu pickup for parts that has a 2.0L (carb is good, but 1 rocker broke) and I was thinking of swapping the flywheel and starter into my son's '87 Montero with 2.6L 5 speed. Are they workable or is it still screwed time? (Will the alternators swap? The Montero one does weird whiney noises)

Build your truck the head men say, but it must be built in such a way...

Entire Thread
Subject	Posted By	Posted
2.0L and 2.6L flywheel interchange?	carnuck	01/06/04 02:05 AM
Re: 2.0L and 2.6L flywheel interchange?	NathanC	01/06/04 04:26 AM
Re: 2.0L and 2.6L flywheel interchange?	fasteddy	01/08/04 04:15 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.724s Queries: 15 (3.722s) Memory: 0.5953 MB (Peak: 0.6283 MB) Data Comp: Off Server Time: 2026-06-07 18:41:42 UTC
Valid HTML 5 and Valid CSS